N-(4-羟基苯基)马来酰亚胺改性水性聚氨酯-丙烯酸酯的制备及性能  

Preparation and Properties of Waterborne Polyurethane-acrylate Modified by 4-Maleimidophenol

作　　者：赵艳娜[1] 姬定西[1] 

机构地区：[1]陕西科技大学化学与化工学院,陕西西安710021

出　　处：《精细化工》2017年第3期349-355,共7页Fine Chemicals

基　　金：陕西省科技统筹创新工程重点实验室项目(2013SZS10-K02);西安市科技局项目〔CXY1513(4)〕;陕西科技计划项目(2016GY-146)~~

摘　　要：采用原位聚合法,以异佛尔酮二异氰酸酯(IPDI)、聚己内酯二元醇(PCL)、2,2-二羟甲基丙酸(DMPA)、三羟甲基丙烷(TMP)、N-(4-羟基苯基)马来酰亚胺(4-HPM)、甲基丙烯酸甲酯(MMA)和丙烯酸丁酯(BA)等为主要原料,制备得到了4-HPM改性的阴离子水性聚氨酯-丙烯酸酯(MWPUA)乳液。利用FTIR、TEM、XRD、TGA、拉伸测试表征了聚合物的结构与性能,并考察了4-HPM用量对MWPUA乳液及其膜性能的影响。结果表明:MWPUA乳胶粒呈球形,具有核-壳结构。当w(4-HPM)=3.0%时,所得乳液粒径分布指数为0.070,平均粒径为97.8 nm,与水性聚氨酯(WPU)相比,合成的MWPUA胶膜的热稳定性得到了提高,最大热分解速率降低至0.81%/min,拉伸强度达到24.9 MPa,接触角达到103.2°,吸水率低至8.8%。A series of 4-maleimidophenol modified anionic waterborne polyurethane-acrylate（ MWPUA） emulsions were prepared by in-situ polymerization with isophorone diamine（ IPDI）,polycaprolactone diol（ PCL）,2,2-dimethylolpropionic acid（ DMPA）,trimethylol propane（ TMP）,4-maleimidophenol（ 4-HPM）,methyl methacrylate（ MMA） and butyl acrylate（ BA） as main raw materials. Structure and properties of polymer were characterized by FTIR,TEM,XRD,TGA and tensile testing. The effects of the content of 4-HPM on the properties of MWPUA emulsion and its films were also studied. The results showed that latex particle was ball-like,and had a core-shell structure. When w（ 4-HPM） = 3. 0%,the particle size distribution index was 0. 070,the average particle size was 97. 8nm. Compared with the pure waterborne polyurethane（ WPU）,the thermal stability of MWPUA latex film had improved. The maximum decomposition rate of film decreased 0. 81% / min,the tensile strength was up to 24. 9 MPa,water contact angle reached 103. 2°,water absorption ratio was as low as 8. 8%.

关 键 词：马来酰亚胺 改性 水性聚氨酯-丙烯酸酯 原位聚合法 丙烯酸系列化学品 

分 类 号：TQ630.7[化学工程—精细化工]