新型钢丝绳二次缠绕张紧装置的开发与应用  

作　　者：骆军军 丁丰梅 

机构地区：[1]金川镍钻研究院自动化装备工程研究所 [2]金川集团有限公司龙首矿

出　　处：《金川科技》2017年第1期66-68,共3页Jinchuan Science and Technology

摘　　要：针对矿山竖井提升机钢丝绳更换方案中，罐道绳、尾绳钢丝绳盘体积和重量较大，无法运至井底采用自下而上的旧绳牵引方案，而须将新绳二次缠绕至地表稳车卷筒上，采用下收绳的更换方案，故其缠绕的松紧度直接关系到新绳的更换质量和使用寿命，本文设计开发的钢丝绳张紧装置提高了钢丝绳预紧力，保证了钢丝绳能够致密的缠绕在稳车上，以防在下绳过程中由于钢丝绳缠绕不紧而嵌入内层导致变形报废事故的发生。According to the mine shaft hoist wire rope replacement program, Steady rope, wire rope tail rope larger disk size and weight, can not be shipped to the bottom of the old rope tow using a bottom-up program, which required a new secondary winding rope to the surface car rolls on steady, using rope replacement program under the close, the tightness of the winding is directly related to its new ropes and life quality replacement paper rope tensioning device designed and developed to improve the rope preload to ensure that the wire rope able to stabilize the car wrapped around a dense, to prevent the next process because the rope is not tight rope wrapped around the inner layer is embedded accidents resulting in deformation of scrap.

关 键 词：罐道绳 尾绳 稳车 预紧力 托辊 抱闸 

分 类 号：TG356.45[金属学及工艺—金属压力加工]