破碎机用铸铁与钢衬板钎焊层钎着状态的超声检测  

Ultrasonic Testing of the Leaching Status of Braze Welding of Cast Iron and Steel for Crushers

作　　者：熊鸿建 涂俊[2] 邬冠华[1] 吴伟[1] 高鸿波[1] 

机构地区：[1]南昌航空大学无损检测技术教育部重点试验室,南昌330063 [2]上海航天精密机械研究所,上海201600

出　　处：《无损检测》2017年第2期13-17,共5页Nondestructive Testing

基　　金：上海航天科技创新基金资助项目

摘　　要：针对钎焊件焊接时存在的夹杂和未融合等缺陷,采用超声水浸C扫描的方法对钎着率进行评价。利用信号处理和图像处理的知识,采用不同的阈值对钎焊层的回波进行处理,生成不同阈值的C扫图像,计算钎着率。通过解剖的方法来验证各种C扫描成像中的钎着率,得出最佳阈值系数。结果表明:超声信号经Hilbert变换后,钎焊层回波幅值采用阈值为-6dB成像时,所得的钎着率最接近实际值。For brazing welding in the presence of inclusion and incomplete fusion defects, water ultrasonic C scanning method was used to evaluate the rate of brazing leaching. Signal processing and image processing knowledge by different thresholds were used to deal with the echo of the solder layer, thus generating different threshold C scan images, and the brazing rate was calculated. The dissection method was employed to verify various C imaging of the brazing rate, and the best threshold coefficient was obtained. The results show that while using the ultrasonic C scan images by Hilbert transform at the threshold for - 6 dB imaging, the resulting brazing rate is much closer to the actual value.

关 键 词：超声水浸C扫 钎焊 阈值 HILBERT 

分 类 号：TG115.28[金属学及工艺—物理冶金]