6082铝合金摩擦搅拌焊缝和熔化极惰性气体保护焊缝电化学性能对比（英文）  

Comparison of Bectrochemical Behaviors between FSW and MIGJoints for 6082 Aluminum Alloy

作　　者：彭勇[1] 沈长斌[1] 赵亚东[1,2] 陈影[1] 

机构地区：[1]大连交通大学,辽宁大连116028 [2]安阳工学院,河南安阳455000

出　　处：《稀有金属材料与工程》2017年第2期344-348,共5页Rare Metal Materials and Engineering

基　　金：Specialized Research Fund for the Doctoral Program of Higher Education of China(2013212412003);Liaoning Province Education Administration(2014185)

摘　　要：利用动电位极化曲线,交流阻抗谱(EIS)和扫描电子显微镜(SEM)测试方法,在室温0.2 mol/L NaHSO_3和0.6 mol/L NaCl的水溶液中,对比研究了铝合金搅拌摩擦焊(FSW)焊缝和熔化极惰性气体保护焊(MIG)焊缝电化学性能。结果表明:FSW焊缝的腐蚀速率低于MIG焊缝和母材的腐蚀速率;FSW焊缝的腐蚀电位高于MIG焊缝和母材的腐蚀电位;FSW焊缝的腐蚀电流密度低于MIG焊缝和母材的腐蚀电流密度;FSW焊缝的极化电阻高于MIG焊缝和母材的极化电阻。所有样品的EIS Nyquist谱图上均有一感抗弧存在;SEM观察表明:仅有少量浅蚀坑出现在FSW焊缝表面。Electrochemical corrosion behaviors of friction stir welding（FSW） and MIG（mixed inert gas） welding joints of 6082 Al alloy and parent material 6082 Al alloy were investigated in a solution of 0.2 mol/L NaHSO3 and 0.6 mol/L NaCl,by potentiodynamic polarization curve,electrochemical impedance spectroscopy（EIS） and scanning electron microscopy（SEM）observation.Results show that the corrosion rate of the FSW joint is less than those of MIG joint and the parent material;the corrosion potential of the FSW joint is more positive than those of MIG joint and the parent material;the corrosion current density of the FSW joint is less than those of MIG joint and the parent material;the polarization resistance of the FSW joint is greater than those of MIG joint and the parent material.EIS Nyquist loops indicate that an inductive arc exist on the complex plane.SEM observation shows that a few shallow pits occurs on the surface of the FSW joint;however,a large number of deeper pits appear on the surface of the parent materials and MIG joint.

关 键 词：电化学行为 搅拌摩擦焊 6082铝合金 熔化焊 

分 类 号：TG453.9[金属学及工艺—焊接]