基于功率前馈的H6拓扑无差拍并网控制方法  

A Dead-beat Grid-connected Control Method of H6 Topology Based on Power Feed-forward Control

作　　者：周宁[1] 颜文俊[1] ZHOU Ning YAN Wen-jun(Zhejiang University, Hangzhou 310027, China)

机构地区：[1]浙江大学,电气工程学院,浙江杭州310027

出　　处：《电力电子技术》2017年第3期33-35,73,共4页Power Electronics

摘　　要：单相H6拓扑光伏逆变器具有高效及抑制漏电流的特点,可有效提高光伏并网系统的效率及安全性。为减小控制延时造成的并网电流畸变率,在分析H6拓扑及无差拍控制工作原理的基础上,提出了预测型无差拍电流控制方法。同时引入功率前馈控制,有效提高了输出电流对输入功率变化的响应速度。在Matlab/Simulink中搭建了单相H6拓扑光伏逆变系统进行仿真,并搭建了2 kW实验样机,验证了该控制方法的有效性。The single-phase H6 topology photovohaic grid-connected inverter has the characteristics of high efficiency and suppressing leakage current, which can effectively improve the efficiency and safety of the photovoltaic grid-connected system.Based on the analysis of the operation of H6 topology and the principle of dead-beat control, a method of predictive dead-beat current control method is proposed to reduce the current distortion due to the control delay. The introduction of power feed-forward control speeds up the response of output current to the input power changes. The system is simulated in the Matlab/Simulink and a 2 kW prototype is constructed.Simulation and experimental results verify the validity of the proposed control method.

关 键 词：逆变器 功率前馈 无差拍控制 

分 类 号：TM464[电气工程—电器]