4B/5B编码的再调制WDM-PON系统分析与实现  

The analysis and implementation of re-modulated WDM-PON system based on 4B/5B coding

作　　者：徐进[1] 李慧林[1] 张封 张晓龙 

机构地区：[1]西安工程大学电子信息学院,陕西西安710048 [2]国家电网陕西电力维护运营有限公司,陕西西安710048

出　　处：《电子设计工程》2017年第7期95-98,共4页Electronic Design Engineering

摘　　要：在输入RSOA功率和数据编码方式不同的情况下,为了解决下行信号对上行再调制信号的串扰问题,研究了上行信号的误码率(BER)性能,并采用了下行2.5 Gb/s,上行1.25 Gd/s的非对称数据传输,4B/5B编码的下行信号再调制的波分复用无源光网络(WDM-PON)系统模型。最后通过MATLAB编程实现4B/5B编码,并在Optisystem软件中进行联合仿真。实验结果表明相对于NRZ编码和Manchester编码,4B/5B编码再调制系统可将编码效率提高到80%。In order to solve the cross-talk problems of up-link to down-link signal re-modulated signal when the input power of RSOA and the coding schemes are different, this paper analyzes the property of The up-link signal bit error rate （BER）,/tnd uses a downstream 2.5 Gb/s, upstream 1.25 Gb/s asymmetric data transmission, and proposes a wavelength division multiplexing passive optical system model based on 4B/SB encoding downstream signals re-modulation. The 4B/SB encoding has been realized in MATLAB program, combined with Optisystem software. Experiement results show that 4B/SB coding and modulation system can improve the coding efficiency to eighty percent.

关 键 词：WDM—PON 4B/5B编码 RSOA 误码率 

分 类 号：TN911.6[电子电信—通信与信息系统]