离子交换树脂法回收水中离子液体  

Recovery of ionic liquid from aqueous solution by ion-exchange resin

作　　者：隋红[1,2,3] 牛雅琪 李鑫钢[1,2,3] 何林[1,3] 

机构地区：[1]天津大学化工学院,天津300072 [2]精馏技术国家工程研究中心,天津300072 [3]天津化学化工协同创新中心,天津300072

出　　处：《化工进展》2017年第4期1209-1216,共8页Chemical Industry and Engineering Progress

基　　金：国家自然科学基金项目(41471258)

摘　　要：目前离子液体辅助油砂萃取工艺中直接蒸馏回收离子液体的能耗较大。为了降低能耗、节约操作成本,本文提出了先用离子交换树脂对离子液体溶液进行离子交换预处理以降低水含量,然后进行蒸馏的方法。采用离子交换树脂AMBERJET 1200Na对模拟水洗所得的离子液体溶液进行处理,以回收其中的离子液体[EMim]BF_4,通过调整吸、脱附工艺参数得到了最佳工艺条件,并深入分析了吸附机理。采用上述最佳条件,对真实油砂矿水洗得离子液体溶液进行了回收,进一步验证并完善了工艺条件。得出当水洗的离子液体溶液体积为150m L、浓度为10 g/L、树脂用量为5g、吸附温度为293K、吸附时间为15min时吸附率达97%以上;当脱附温度为333K、盐酸脱附剂质量分数为15%时脱附率达93%以上;经蒸馏,[EMim]^+回收率达91%以上。研究结果还表明:本工艺具有较好的节能效果,与直接蒸馏相比,能耗降低45%以上。The ionic liquid enhanced bitumen recovery from oil sands has been considered a promising process for the unconventional oil production. However, the recovery of ionic liquid from the residual solids is a challenge due to the high energy consumption if the direct distillation is applied. A new technology was proposed to pretreat the ionic liquids solution with ion-exchange resins （AMBERJET 1200Na）. The concentrated ionic liquid was further separated by distillation. The optimal operational conditions were obtained by adjusting parameters of adsorption and desorption. The mechanism of the adsorption process was also analyzed. To confirm the above results, the real ionic liquids solution obtained from the water washing was applied as sample which was processed under the above optimal conditions. The results showed that the efficiencies of adsorption, desorption and recovery were over 97%, 93% and 91%, respectively when 5g resin dosage was used to treat the ionic liquid solution （10g/L） at 293K for the adsorption and 333K for desorption. Finally, it was found that this process could save energy by 45% compared with the direct distillation under laboratory conditions.

关 键 词：离子液体 离子交换 吸附 脱附 回收 

分 类 号：TQ322.4[化学工程—合成树脂塑料工业]