汽车万向传动装置动态特性仿真分析  

Dynamic Feature Simulation Analysis of Auto Universal Transmission Device

作　　者：田海兰[1] 刘灵歌 闫少华 

机构地区：[1]郑州财经学院机电与汽车工程学院,河南郑州450044 [2]机械工业第六设计研究院有限公司,河南郑州450007

出　　处：《成组技术与生产现代化》2017年第1期27-30,共4页Group Technology & Production Modernization

基　　金：河南省高等学校重点科研资助项目(16A120017)

摘　　要：在Pro/E软件中建立万向传动装置的三维模型,并基于ADAMS软件和ANSYS软件进行动态特性仿真分析.采用理论计算和运动仿真相结合的方法,得到了十字轴万向节输出轴角加速度和角速度曲线,并对中间传动轴进行模态分析,得到了相应振型和固有频率.仿真结果表明:运动仿真曲线与理论分析基本一致,模态求解数据与试验数据相符;模型构建合理,仿真结果可靠;动态特性仿真可简化机械产品设计过程,为进一步优化万向传动装置结构提供指导.The three-dimensional model of the universal transmission device was built up by using Pro/E software and the dynamic characteristic simulation analysis is respectively carried out on the auto transmission device based on ADAMS software and ANSYS software. Getting angle acceleration and angle velocity curves by theoretical calculations and kinematics simulation of the established model; and then, natural frequency and vibration mode can be obtained by modal analysis of intermediate shaft. Results indicate that simulation curves are in consistent with theoretical analysis, modal results are agree with the experimental data and it is effectively that the model of the universal transmission device is reasonable and reliability. At the same time, the simulation results can simplify the design process of the universal transmission device, which lay a good foundation for structure optimization universal transmission device.

关 键 词：万向传动装置 三维模型 动态仿真 

分 类 号：TH113[机械工程—机械设计及理论]