碳纤维复合吸波涂层材料的性能影响研究  

Influencing Factors of Properties of the Carbon Fiber Composite Absorbing Coating Materials

作　　者：班国东 刘朝辉[1] 叶圣天[2] 杨宏波[1] 陶睿[1] 罗平[1] 向玩风 

机构地区：[1]解放军后勤工程学院化学与材料工程系,重庆401311 [2]中国人民解放军63983部队,江苏无锡214000 [3]湖南省洞口县花园中心小学,湖南洞口422309

出　　处：《当代化工》2017年第3期449-453,共5页Contemporary Chemical Industry

基　　金：全军后勤科研计划项目(BY115C007);研究生创新专项经费资助项目

摘　　要：以水性聚氨酯为基,碳纤维为填料,制备了碳纤维复合吸波涂层材料。采用扫描电镜、差示扫描量热仪、傅里叶红外光谱仪、X射线衍射仪和矢量网络分析仪对碳纤维复合吸波涂层材料的结构与性能进行了测试和表征。实验结果表明:碳纤维复合吸波涂层材料为碳纤维和水性聚氨酯的物理结合,随着碳纤维含量的增加和厚度的增大,碳纤维复合吸波涂层材料的反射率峰值均向低频移动,当碳纤维含量为0.8%,涂层厚度为1.2 mm时,碳纤维复合吸波涂层的反射率峰值达到-6.01 dB,小于-5 dB的带宽为4.2 GHz,涂层面密度为1.02kg/m^2。The carbon fiber composite absorbing coating materials were synthesized with waterborne polyurethane as carrier and carbon fiber as filler. The microstructure and properties of the carbon fibers composite absorbing coating materials were characterized by means of scanning electron microscopy, differential scanning calorimetry, Fourier infrared spectrometer, X-ray diffraction analyzer and vector network analyzer. The results confirmed that carbon fiber composite absorbing coating material was the physical combination of carbon fibers and waterborne polyurethane. With the increase of carbon fibers content and the thickness of the coating, the peak reflectivity of carbon fiber composite absorbing coating materials moved to low frequency; when carbon fiber content was 0.8% and the thickness of the coating was 1.2 mm, the peak reflectivity of carbon fiber composite absorbing coatings material reached 6.01 dB with a -5 dB bandwidth of nearly 4.2 GHz, level density of which was 1.02 kg/m2.

关 键 词：碳纤维 吸波涂层材料 反射率 性能 影响 

分 类 号：TQ637[化学工程—精细化工]