热管理系统在发动机台架试验中的优化应用  

Optimization and Application of Thermal Management System in Engine Bench Test

作　　者：王泽众[1] 

机构地区：[1]上海大众汽车有限公司,上海201805

出　　处：《内燃机工程》2017年第2期15-18,共4页Chinese Internal Combustion Engine Engineering

摘　　要：针对发动机台架试验中发动机水温波动大、电涡流测功机供水不足等问题,设计了一套两级冷却系统,即在发动机小车上加装热交换器以解决发动机冷却问题。结合发动机功率、台架供水流量等条件,利用Flowmaster进行仿真,实际安装后进行台架试验。研究结果表明:发动机水温稳定在±3℃内,电涡流测功机冷却水较方案修改前增加4m3/h。To prevent engine coolant temperature fluctuation and insufficient water supply in an eddy current dynamometer during engine bench tests, a second stage cooling system was added to engine pilot as a solution. First, a simulation of the system was performed with the Flowmaster based on relevant parameters to optimize the system, and then a comparison experiment was conducted to verify the simulation. The results show that the temperature of the engine coolant can be stable within±3℃, water flow rate in the dynamometer is 4 m^3/h more than before.

关 键 词：内燃机 发动机台架试验 电涡流测功机 热管理系统 Flowmaster仿真 

分 类 号：TK417.5[动力工程及工程热物理—动力机械及工程]