基于API579准则对弯管腐蚀数值模拟的分析  

Numerical Simulation Analysis of Elbow Erosion Based on API579 Criterion

作　　者：崔晔晖 曾祥国[1,2] 李洋[1] 盛鹰[1] 

机构地区：[1]四川大学建筑与环境学院,四川成都610065 [2]四川大学能源工程安全与灾害力学教育部重点实验室,四川成都610065

出　　处：《包钢科技》2017年第2期53-57,共5页Science & Technology of Baotou Steel

摘　　要：为定量描述高压回注管道弯管处由于流体速度与方向的改变而引起的物理冲刷腐蚀,本文以川西北气矿的高压回注水管道为例,利用Fluent软件建立了垂直弯管冲刷腐蚀模型,并利用API579准则对相应弯管处的剩余强度进行评价和研究。结果表明,腐蚀速率最大区域发生在弯管段外壁。同时,根据数值模拟计算对各控制参数根据遗传算法进行优化处理。针对管道内壁结垢无法测量准确数据的情况,建立了一套相对完整的评价优化分析系统。In order to quantitatively describe the physical elbow erosion of high pressure reinjection pipeline caused by changes of fluid velocity and direction, taking the high pressure reinjection pipeline of NGPD （ northwest of Sichuan gas production district） as an example, Fluent software is used to establish a vertical elbow erosion model, the residual strength of corresponding elbow is evaluated and studied by using API579 criterion. The result shows that the maximum erosion rate occurs on the outer wall of elbow pipe. Meanwhile, according to numerical simulation calculation, the control parameters are optimized by the genetic algorithm. In view of the fact that the scale of the pipeline inner wall cannot be measured accu-rately, a set of relatively complete evaluation and optimization analysis system is established.

关 键 词：数值模拟 API579准则 冲刷腐蚀 腐蚀速率 

分 类 号：TG174.1[金属学及工艺—金属表面处理]