聚丙烯腈基不对称膜相转化过程中孔结构形成研究  

Investigation of pore formation for polyacrylonitrile base asymmetric membrane during phase inversion process

作　　者：金鑫[1] 李琳[1] 王春雷[1] 徐瑞松[1] 刘峤[1] 潘艳秋[1] 李魁然 王同华[1] 

机构地区：[1]大连理工大学化工学院精细化工国家重点实验室膜科学与技术研究开发中心,大连116024 [2]台湾中原大学薄膜研究发展中心,台湾32023

出　　处：《膜科学与技术》2017年第2期46-52,共7页Membrane Science and Technology

基　　金：国家自然科学基金(21506020;21436009;21576035;21376037);中央高校基本科研业务费(DUT16RC(4)05);中国博士后科学基金(2014M561232)

摘　　要：采用L-S相转化法制备聚丙烯腈不对称膜,使用光学显微镜测试非溶剂在铸膜液中的扩散速率,结合光穿透实验、扫描电子显微镜及气体渗透性能测试结果,研究相转化过程中溶剂种类、铸膜液浓度及蒸发时间对成膜过程中孔结构形成过程的影响.结果表明:成膜工艺对相转化过程中的孔结构的形成有明显影响.不同溶剂制备的铸膜液其黏度及溶剂与非溶剂溶解度参数差不同,影响非溶剂在铸膜液中扩散系数.增加铸膜液浓度,其黏度增加;延长蒸发时间,膜的致密层厚度增加,二者都使非溶剂在铸膜液中的扩散系数下降,从而影响相转化过程中孔结构的形成.The asymmetric membranes were prepared by L-S phase mvermon method, upttcal mmroscopy was adopted to investigate the diffusion rate of non-solvent in casting solution. Light transmittance experiment, scanning electron microscopy and gas permeation test were used to investigate the effects of solvent type of the casting solution, casting solution concentration and evaporation time on the asymmetric membrane formation process. Results show that the pore structure of membrane formation process was affected significantly by technological conditions. Type of solvent affected the viscosity and intermiscibility of solvent and non-solvent, which caused the different diffusivity of non-solvent in casting solution and affected the pore structure formation during phase inversion process. Increasing the casting solution concentration caused the rise of viscosity and extension of evaporation time increased the dense membrane thickness which both decreased the diffusivity of non-solvent in casting solution and affected the pore structure formation during phase inversion process.

关 键 词：聚丙烯腈 不对称膜 相转化 孔结构形成 

分 类 号：TQ051.893[化学工程]