环氧-聚醚端基改性硅油合成与工艺研究  

Synthesis and process research of silicone oil modified by epoxy-polyether terminal group

作　　者：崔晴晴[1] 李同国[2] 赵莹[1] 张宝昌[1] 宋晓峰[2] 

机构地区：[1]长春工业大学化学与生命科学学院,长春130012 [2]长春工业大学化学工程学院,长春130012

出　　处：《化工新型材料》2017年第4期221-223,共3页New Chemical Materials

基　　金：吉林省科技厅项目(20110351;20130102065JC);长春市重大科技攻关项目(2014111)

摘　　要：以烯丙基聚醚(F-6)、环氧氯丙烷、1,1,3,3-四甲基二硅氧烷为原料制得环氧基烯丙基聚醚二硅氧烷。在碱性条件下,八甲基环四硅氧烷(D4)开环缩合,与环氧基烯丙基聚醚二硅氧烷反应合成环氧-聚醚端基改性硅油。1 H-NMR表明成功合成目标产物,讨论了物料比、反应温度、反应时间和催化剂用量对产物性能的影响,确定最佳工艺:环氧基烯丙基聚醚二硅氧烷与D4质量配合比为1∶1,催化剂用量为0.7%(wt,质量分数),60℃,反应3h,制得的环氧-聚醚端基改性硅油,收率达到78%。The disiloxane with epoxy and allyl polyether group was synthesized by hydrosilylation firstly,this reac- tion was carried out with F6, epoxy chloropropane and 1,1,3,3-tetramethyl disiloxane as raw material. Then the reaction of D4 and disiloxane with epoxy group and allyl polyether was carried out under tetramethyl ammonium hydroxide as cata- lyst to prepare epoxy-polyether terminal group modified silicone oil. The product was characterized by 1H-NMR. The effects of material feeding ratio, reaction time, temperature and amount of catalyst on the product properties were discussed. The best process was that the reaction temperature was 60℃ for 3h, the molar ration of the disiloxane with epoxy group and allyl polyether to D4 was 1 ： 1, amount of catalyst was 0.7% （wt）of monomer weight. The epoxy-polyether terminal group modified silicone oil was prepared successfully by the process,and the yield was 78%.

关 键 词：环氧基烯丙基聚醚二硅氧烷 八甲基环四硅氧烷 环氧-聚醚端基改性硅油 工艺优化 

分 类 号：TQ324.21[化学工程—合成树脂塑料工业]