高流动性PA 6超细纤维的制备及其性能研究  

Preparation and properties of high-flowability PA 6 ultrafine fibers

作　　者：陈忠海[1] 刘玉峰[1] 胡天辉[1] 刘跃军[2] 邓如生[1] 

机构地区：[1]株洲时代新材料科技股份有限公司,湖南株洲412007 [2]湖南工业大学,湖南株洲412007

出　　处：《合成纤维工业》2017年第2期34-37,共4页China Synthetic Fiber Industry

摘　　要：采用自制的高流动性聚己内酰胺(HPA 6)、普通聚己内酰胺(PA 6)、低密度聚乙烯(LDPE)为原料,通过共混纺丝法分别制备HPA 6/LDPE定岛纤维和HPA 6/PA 6/LDPE不定岛纤维,溶解去除LDPE,得到一系列HPA 6超细纤维;研究了HPA 6的可纺性及其超细纤维的线密度、力学性能、染色性能等。结果表明:由于HPA 6在纺丝温度下较好的流动性和高支化结构及大量末端基团,HPA 6可纺性良好;HPA 6/LDPE质量比为70/30时,157.4 dtex/36 fHPA 6超细纤维断裂强度为3.85 c N/dtex,断裂伸长率为14%,染色深度为1.809,色牢度达5级;HPA 6超细纤维的力学性能和染色性能优异,与PA 6超细纤维性能相当,可拓展其在纤维领域的应用。By using a self-made high-flowability polycaprolactam （ HPA 6 ）, traditional polycaprolactam （ PA 6） and low-densi- ty polyethylene （LDPE） as raw material, an HPA 6/LDPE figured islands-in-sea fiber and an HPA 6/PA 6/LDPE unfigured islands-in-sea fiber were prepared via blend spinning process, which were produced into HPA 6 ultrafine fibers by removing LDPE. The spinnability of HPA 6 and the linear density, mechanical properties and dyeing behavior of the ultrafine fiber were studied. The results showed that HPA 6 exhibited fairly good spinnability due to the high flowability at spinning temperature, highly-branched structure and a large amount of end groups; the HPA 6 uhrafine fiber of 157.4 dtex/36 f had the breaking strength of 3.85 cN/dtex, elongation at break 14%, dyeing depth 1. 809 and color fastness grade 5 as the HPA 6/LDPE mass ra- tio was 70 - 30 ; HPA 6 ultrafine fiber possessed excellent mechanical properties and dyeing behavior equal to those of PA 6 ultra- fine fiber, so its application could be expanded in fiber field.

关 键 词：聚己内酰胺纤维 高流动性 超细纤维 海岛结构 共混纺丝 

分 类 号：TQ342.11[化学工程—化纤工业]