无机有机复合高分子材料包覆纳米Fe_3O_4的制备及其性能研究  

Research on Preparation and Properties of Nanometer Fe_3O_4 Coated by Inorganic-organic Composite Polymer Materials

作　　者：李瑞姣[1] 李家亮[1] 刘浩[1] LI Rui-jiao LI Jia-liang LIU Hao(School of Chemical Engineering ,Shandong University of Technology, Shandong Zibo 255000, Chin)

机构地区：[1]山东理工大学化工学院,山东淄博255000

出　　处：《当代化工》2017年第4期610-612,共3页Contemporary Chemical Industry

摘　　要：利用物理复合的方法制备出聚硅硫酸铁-壳聚糖(PFSS-CTS)复合高分子材料,并将其包覆在纳米Fe_3O_4的表面得到新型高效的磁絮凝剂PFSS-CTS@Fe_3O_4。通过扫描电子显微镜、傅立叶变换红外光谱仪、X射线衍射仪对其表面形态和结构进行表征,结果表明,PFSS与CTS在反应前后物质结构发生了变化,生成了一种新的聚合物,并成功包覆在了纳米Fe_3O_4的表面,得到了理想的产物。然后将其对工业废水进行絮凝试验得出该絮凝剂最佳合成及应用条件:m(PFSS)∶m(CTS)=5∶1,投加量为180 mg/L,沉降时间为20 min。PFSS-CTS@Fe_3O_4在最佳条件下COD、浊度、色度的去除率最高分别达到85.12%、93.54%,89.74%。Polysilicon ferric sulfate-chitosan （PFSS-CTS） composite polymer material was prepared by using physical compounding method, and the composite polymer material was coated on the surface of nanometer Fe3O4 to get a new type of efficient magnetic flocculant PFSS-CTS@Fe3O4. Its surface morphology and structure were characterized by scanning electron microscope, Fourier transform infrared spectrometer, X-ray diffraction. The results show that the material structure of PFSS and CTS has changed into a new kind of polymer which coated on the surface of nanometer Fe3O4 successfully after the reaction,that means the ideal product has been synthesized. Then the optimum synthesis and application conditions which were concluded from the flocculation test of industrial wastewater were obtained as follows： m（PFSS）：m（CTS） = 5：1, dosing quantity 180 nag/L, settling time 20 min. Under the best conditions, the removal rates of COD, turbidity and chromaticity by using PFSS-CTS@Fe3O4 were up to 85.12%, 93.54%, 89.74% ,respectively.

关 键 词：PFSS-CTS 纳米FE3O4 磁絮凝剂 PFSS-CTS@Fe3O4 COD 浊度 色度 

分 类 号：TQ325[化学工程—合成树脂塑料工业]