电磁制动对结晶器流场及铸坯表面质量的影响  

Effect of Electromagnetic Brake on Flow Field in A Continuous Casting Mold and Surface Quality of Slab

作　　者：于湛 周月明[2] 吴存有[2] 张振强[3] 任忠鸣[3] 

机构地区：[1]南京钢铁股份有限公司,江苏南京210035 [2]宝山钢铁股份有限公司,上海201900 [3]上海大学材料科学与工程学院,上海200072

出　　处：《上海金属》2017年第2期39-44,共6页Shanghai Metals

摘　　要：采用低熔点金属模拟板坯电磁制动条件下结晶器内的流场,使用超声多普勒测速仪测量不同磁场分布和磁感应强度条件下的流速。结果表明,在试验条件下,采用上部磁场B_U=0.18 T和下部磁场B_L=0.5 T时,电磁制动能够增强上环流流动,改善结晶器液面流动和波动。工业试验结果表明,采用I_U=0,I_L=I_(max),有利于减少铸坯表面缺陷。The flow pattern of liquid metal was investigated in continuous casting mold of slab with the electromagnetic brake using a low-melting metal model as analogue to molten steel. The velocity measurement was conducted by the Ultrasonic Doppler Velocimeter （UDV） under various magnetic distribution and flux density. The results showed that the flow and fluctuation at the surface were improved with the upper part of magnetic field BU = 0.18 T and the lower part of magnetic field BL = 0.5 T under the experimental conditions. The industrial test results showed that it was beneficial for reducing surface defects of slab with IU=0,IL=Imax.

关 键 词：电磁制动 结晶器 磁场强度 表面质量 

分 类 号：TF777[冶金工程—钢铁冶金]