基于迎风差分格式的TVD聚合物驱数学模拟  

Mathematical simulation of polymer flooding with upstream-TVD solution

作　　者：贾英[1] 汤昌福[2] 黄磊[3] JIA Ying TANG Changfu HUANG Lei(l.Petroleum Exploration and Production Research Institute, SINOPEC, Beijing 100083, China Exploration Research Institute, Anhui Provincial Bureau of Coal Geology, Anhui 230088, China Research Institute of Petroleum Exploration ＆ Development,PetroChina, Beijing 100083, China)

机构地区：[1]中国石化石油勘探开发研究院,北京100083 [2]安徽省煤田地质局勘查研究院,安徽合肥230088 [3]中国石油勘探开发研究院,北京100083

出　　处：《断块油气田》2017年第3期373-377,共5页Fault-Block Oil & Gas Field

摘　　要：聚合物驱替过程中存在饱和度和聚合物质量浓度2个间断,在2个间断之间有"油墙"形成。文中分别运用特征线法(MOC)、一阶迎风差分(SPU)方法和显式全变差递减差分(TVD)方法对聚合物驱替过程进行求解,通过与特征线解进行对比,考察了SPU方法和TVD方法的数值模拟效果。研究表明:SPU方法的精度低,数值耗散严重,对2个间断特别是聚合物质量浓度间断的捕捉能力较差;高阶精度TVD方法分辨力高,但在"油墙"处会产生非物理"振荡"。利用迎风的思想,对传统TVD方法进行了改进。数值实验表明,改进的TVD方法在保持高精确度的同时,还能有效地防止非物理"振荡"的产生,具有较好的稳定性。For polymer flooding, there are two discontinuities of saturation and concentration, between which ＂oil bank” exists. The polymer flooding was investigated with method of characteristics（MOC）, single point upstream（SPU） finite difference method and explicit total variation diminishing（TVD） finite difference method respectively. Based on the solution of MOC, performance of simulation results of both SPU and TVD were evaluated. It is suggested TVD exhibits a better numerical performance while the SPU scheme suffers numerical diffusion badly. The conventional TVD method is modified on the calculation of numerical flux, so that non-physical oscillation can be prevented on the ＂oil bank” between the two discontinuities. Numerical tests demonstrate that the upstream-TVD can achieve better stability than the conventional TVD method.

关 键 词：聚合物驱 特征线法 一阶迎风格式 TVD 非物理“振荡” 

分 类 号：TE357.461[石油与天然气工程—油气田开发工程]