配网高压电能计量装置整体校准技术研究  

Research on the overall calibration technology of high voltage power metering device in distribution network

作　　者：陈缨 岳长喜[2] 杨勇波 朱凯[2] 项琼[2] 王欢[2] 

机构地区：[1]四川省电力科学研究院,成都610072 [2]中国电力科学研究院,武汉430074

出　　处：《电测与仪表》2017年第9期35-39,共5页Electrical Measurement & Instrumentation

基　　金：国家电网公司科技项目(JL71-15-044)

摘　　要：高压电能计量装置一般采用误差分配的方法进行管理和配置,间接控制其整体误差限值。文章介绍了高压电能计量装置整体误差直接测量系统的结构和原理,应用该系统直接测量一套10 k V、100 A高压电能计量装置的整体误差,并将测量结果与综合误差法的计算结果进行了计量比对。结果表明该系统能够准确测量高压电能计量装置的整体误差,与综合误差计算法相比具有直接、快速、准确的特点,能够降低高压电能计量装置误差性能在实际运行中的不确定性。The method of error distribution is used in the management and configuration of high voltage power metering device to control the overall error limits indirectly. This paper introduces the structure and principle of the direct measurement system of the whole error of high voltage power metering device. The whole error of a set of 10 kV and 100 A high voltage power metering device is directly measured by the system. And the measurement results are com- pared with the calculation results of the comprehensive error method. The results show that the system can accurately measure the whole error of high voltage power metering device. Compared with the method of comprehensive error cal- culation, it has the characteristics of direct, fast and accurate and can reduce the uncertainty of the error of high volt- age power metering device in actual operation.

关 键 词：高压电能计量装置 综合误差 不确定度 整体校准 

分 类 号：TM933[电气工程—电力电子与电力传动]