太赫兹聚合物光子晶体光纤关键制备工艺研究  

Key Fabrication Technology of Polymer Photonic Crystal Fiber for Terahertz Transmission

作　　者：陈琦[1,2] 孔德鹏[3] 苗竟 何晓阳[1,2] 张健[1,2] 王丽莉[3] 

机构地区：[1]中国工程物理研究院电子工程研究所,四川绵阳621999 [2]中国工程物理研究院微系统与太赫兹研究中心,四川绵阳621999 [3]中国科学院西安光学精密机械研究所,西安710119

出　　处：《光子学报》2017年第4期121-126,共6页Acta Photonica Sinica

基　　金：国家自然科学基金(Nos.11504416;61275106);中国工程物理研究院太赫兹科学技术基金(No.CAEPTHZ201307);中国科学院"西部之光"人才培养计划资助~~

摘　　要：针对太赫兹聚合物光子晶体光纤的应用需求,对聚合物光纤的制备材料、预制棒制备、拉伸工艺等关键制备工艺进行了研究.分析了聚合物材料的特性,并进行实验验证,结果表明ZEONEX材料的吸收系数低于3cm^(-1),吸水性低于0.01%,玻璃化转变温度和分解温度分别高达136℃和420℃,在太赫兹光纤制备中具有优良性能.预制棒制备和光纤拉伸的工艺方面,在注塑法的基础上改进了模具系统,使用可控的微压拉丝技术,在10200Pa范围内可实现±1.5Pa的微压差精确控制,较大程度上提高了光纤预制棒的成品率和光纤的形变控制,有望制备出高空气填充率的聚合物光子晶体光纤.The technologies of fabricating polymer photonics crystal fiber to suit the application needs of terahertz transmission were studied, which were related to material selecting, fiber preform fabrication and fiber drawing. According to the analyzation of optical polymers＇ properties and the experimental verification, ZEONEX has low absorption of less than 3 cm-1 in Terahertz waves, low water absorption of less than 0.01%, high glass transition tempreture and decomposition temperature of 136℃ and 420℃ respectively. As for fiber preform fabrication and drawing, the model system was improved based on injection moulding, and drawing technology of Pascal level pressure auto-control was initially invented. The controlled value oscillations is no more than 1. 5 Pa in the range of 10-- 200 Pa. Therefore the preform quality and reliability are promoted and fiber microstructure is effectively controlled. With the proposed technology it is hopeful of producing high air filling factor polymer photonics crystal fiber.

关 键 词：太赫兹波 光子晶体光纤 光纤制备 塑料光纤 预成型技术 

分 类 号：TN818[电子电信—信息与通信工程] TB383[一般工业技术—材料科学与工程]