胶料停放时间对两段式串联混炼工艺的影响  

Effect of Storage Time of Compound on Two-step Tandem Mixing Process

作　　者：边慧光[1] 吴浩[1] 汪传生[1] 

机构地区：[1]青岛科技大学机电工程学院,山东青岛266061

出　　处：《橡胶工业》2017年第5期309-311,共3页China Rubber Industry

基　　金：山东省成果转化(短纤维增强复合胎面轮胎翻新关键技术及装备)资助项目(2014CGZH0405)

摘　　要：采用串联式密炼机,分别研究停放时间对啮合型转子和剪切型转子密炼机混炼胶质量的影响。结果表明,停放时间对啮合型转子串联式混炼的影响大于剪切型转子串联混炼,经综合分析混炼胶的各项物理性能,可知胶料停放时间3 h为最佳值。Using tandem mixer, the effect of storage time on the quality of the compound by meshing rotor and shear rotor was investigated, respectively. The results showed that, the effect of storage time on meshing rotor tandem mixing was greater than that of shear rotor tandem mixing. Through a comprehensive analysis on the physical properties of the compound, it was found that the optimum storage time was 3 h.

关 键 词：串联式密炼机 停放时间 啮合型转子 剪切型转子 

分 类 号：TQ330.63[化学工程—橡胶工业]