典型铜冶炼行业基准排气量的比较与分析  

Comparison and Analysis of Benchmark Emission in Typical Copper Smelting Industry

作　　者：杜龙[1] 唐斌[1] 

机构地区：[1]中国瑞林工程技术有限公司,江西南昌330038

出　　处：《有色冶金设计与研究》2017年第2期17-20,共4页Nonferrous Metals Engineering & Research

基　　金：国家863计划课题"新型闪速冶金关键技术与装备"(编号:2013AA064001)

摘　　要：针对2010年环境保护部发布的《铜、镍、钴工业污染物排放标准》(GB 25467-2010)中关于单位产品基准排气量的规定,结合《铜、镍、钴工业污染物排放标准》(征求意见稿)编制说明》,界定了纳入计算的废气种类,比较和分析了闪速炉、底吹炉、侧吹炉、白银炉、奥斯麦特炉、合成炉工艺的单位产品基准排气量,单位产品基准排气量从大到小排序为奥斯麦特炉、白银炉熔炼、底吹熔炼、合成炉熔炼、侧吹炉熔炼、闪速熔炼工艺。从环保角度,应推广闪速熔炼、合成炉熔炼和侧吹炉熔炼工艺等排气量小的工艺及其设备。According to the provisions on benchmark emission of unit product in the Emission Standard of Pollutants for Copper,Nickel, Cobalt Industry（GB 25467-2010） issued in 2010 by the Ministry of Environmental Protection, together with the Preparation Instructions for the Emission Standard of Pollutants for Copper, Nickel, Cobalt Industry（Draft for Comments）, the paper defines the exhaust gases to be calculated and compares and analyzes the benchmark emission of unit product of FSF, bottom-blown furnace,side-blown furnace, Baiyin furnace, Ausmelt furnace and synthetic furnace. The order of benchmark emission of unit product from largest to smallest is Ausmelt furnace, Baiyin furnace smelting, bottom-blown furnace smelting, synthetic furnace smelting, side-blown furnace smelting and FSF smelting. With environmental protection taken into consideration, the process of FSF smelting, synthetic furnace smelting and side-blown furnace smelting and their equipment with small emission shall be promoted.

关 键 词：铜冶炼 单位产品基准排气量 比较 

分 类 号：X506[环境科学与工程—环境工程] TF811[冶金工程—有色金属冶金]