基于Xilinx芯片的FPGA的DONE信号上拉电阻阻值分析  

Analysis of pull-up resistor of the DONE signal of FPGA based on Xilinx chip

作　　者：郭京[1] 沈华[1] 段小虎[1] 

机构地区：[1]中航工业西安航空计算技术研究所,陕西西安710068

出　　处：《微型机与应用》2017年第10期37-39,共3页Microcomputer & Its Applications

摘　　要：基于Xilinx芯片的FPGA集成了越来越多的可配置逻辑资源、各种各样的外部总线接口以及丰富的内部RAM资源。在FPGA的电路设计中,上电配置电路至关重要。其中,DONE信号上拉电阻阻值的选择很容易被人忽略,错误的阻值选择往往会导致意想不到的情况。通过采用4.7 kΩ电阻上拉DONE信号产生的试验结果,来分析DONE信号上拉电阻必须为330Ω的原因。FPGA based Xilinx chip integrates more and more configurable logic resources,a wide variety of external bus interfaces and a wealth of internal RAM resources. In the circuit design of FPGA,the design of the power up circuit is very important. Among them,the DONE signal pull-up resistor is very easy to be ignored,the error resistor selection often leads to unexpected situations. In this paper,the reason that the pull-up resistor of the DONE signal must be 330 Ω is analyzed,by the test results generated by the 4. 7 kΩ pull-up resistor of DONE signal.

关 键 词：FPGA 上拉电阻 DONE信号 

分 类 号：TP302.7[自动化与计算机技术—计算机系统结构]