石英玻璃微铣削加工的离散元模拟与试验分析  

DEM Simulation and Experiment Analysis for Three-dimensional Micro Milling Process of Quartz Glass

作　　者：郭雪琪 安平[1] 杨武[1] 魏智[1] 

机构地区：[1]河北工业大学

出　　处：《工具技术》2017年第4期33-37,共5页Tool Engineering

基　　金：河北省自然科学基金(E2012202112)

摘　　要：针对石英玻璃的微铣削过程,采用离散元模拟软件PFC3D建立真实的离散元模型,模拟裂纹的生成与扩展情况,得到铣削力曲线图以及铣削过程的较优加工工艺参数,并通过铣削力试验验证了石英玻璃三维离散元模型有效性及离散元法模拟石英玻璃切削过程的合理性。基于模型和试验一致,得出不同铣削参数下铣削力的变化规律。结果表明:铣削力随主轴转速的增加则先减小后增加再减小,随切削深度和进给速度的增加而增加,随刀具倾角的增加则先增加后减小。A 3D DEM model for micromilling process of quartz glass is established by the program of PFC3D. The formation and extension of milling cracksare simulated and the milling force curveand the optimal technological parameters are obtained base on the model. At the same time the experimental results can demonstrate the effectiveness of the three - di- mensional discrete element model of the quartz glass, and discrete element method to simulate quartz glass cutting process is reasonable. Milling forces under different milling parameters are obtained based on both the model and the experiment. Re- sults show that the milling force with the increase of the spindle speed is firstlydecreased, thenincreased, andlastly decreased ,with the increase of cutting depth and the feeding speed is increased, with the increase of the cutting tool angle is firstly increased then decreased.

关 键 词：石英玻璃 微铣削 裂纹 铣削力 离散元 模拟 

分 类 号：TG54[金属学及工艺—金属切削加工及机床] TH14[一般工业技术—材料科学与工程]