检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王旭[1] 袁波[1] 陈耀[1] 许文柳 宋志丹[1]
机构地区:[1]贵州大学空间结构研究中心,贵州贵阳550003
出 处:《贵州大学学报(自然科学版)》2017年第2期128-133,共6页Journal of Guizhou University:Natural Sciences
基 金:国家自然科学基金项目资助(51168010)
摘 要:基于计算流体力学(CFD)方法,利用商业软件FLUENT计算风对桥梁的静力作用,以一大跨桥梁的扁平箱梁为模型,分别以Realizable k-ε和SST k-ω湍流模型建立流场,提取不同攻角下的桥梁三分力系数,与物理风洞试验数据进行对比,给出主梁断面周围流场的压强与速度分布图并进行分析。结果表明:数值模拟结果与风洞试验结果基本吻合,其结果精度能满足工程上的需求,进一步验证CFD能较为精确的数值模拟主梁断面的三分力系数并且在显示流体流动方面有极大的优越性。A novel computational fluid dynamics (CFD) method was proposed; the static effect on bridge pro- duced by wind was computed. With a model of a flat box girder of long span Bridges, the flow field was estab- lished with Realizable k-epsilon and SST k-omega turbulence model, the bridge three component coefficient was extracted under different Angle of attack and compared with physical wind tunnel test data, what is more, stress nephogram motion pattern around the main girder cross section in the flow field is drew. The results show that the numerical simulation result was consistent with the results of wind tunnel test, the precision of numerical simula- tion result can satisfy engineering demand. It concluded that aerodynamic force coefficient of bridge section could be simulated accurately by CFD method and it shows great advantage in according to fluid flow over other method.
分 类 号:U441.2[建筑科学—桥梁与隧道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15