检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:施琦[1,2] 章小峰[1] 赵丹丹[1] 黄贞益[1] 阚中伟
机构地区:[1]安徽工业大学冶金工程学院,安徽马鞍山243002 [2]安徽工业大学工商学院机械学院,安徽马鞍山243002
出 处:《热加工工艺》2017年第9期101-103,107,共4页Hot Working Technology
基 金:安徽工业大学工商学院青年教师科研基金(QZ201504)
摘 要:以SUP6弹簧钢为研究对象,评定了热轧带钢的带状偏析级别,对比分析了现场加热前后的连铸坯偏析情况,研究了不同加热温度和保温时间对连铸坯偏析的影响。结果表明,SUP6弹簧钢连铸坯的中心部位存在成分偏析,并遗传到热轧带钢中,形成带状组织。热轧前的加热工艺有利于偏析情况的减轻。综合考虑,SUP6弹簧钢较合适的轧前加热制度为温度是1000℃,保温30 min。Taking SUP6 spring steel as research object, the banded segregation level of hot rolled strip was evaluated, the segregation of continuous casting slab before and aiter heating on site was compared and analyzed, and the effects of different heating temperature and holding time on the segregation of continuous casting slab were studied. The results show that composition segregation exists in central part of SUP6 spring steel continuous casting slab. It inherits into hot strip and forms banded structure. The heating process before hot rolling is conducive to the reduction of segregation. By comprehensive consideration, the suitable heating parameters for UP6 spring steel are temperature of 1000℃, and holding time of 30 min.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229