检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李宝磊[1] 陈朝中[1] 王小娜[1] 侯海盟[1] 刘舒[1] 孔德勇[1]
出 处:《环境工程》2017年第5期117-121,共5页Environmental Engineering
基 金:国家公益性行业科研专项"煤化工残渣处置和利用过程的环境风险控制技术研究"
摘 要:通过对焦油渣、煤沥青开展配煤捣固炼焦实验,分别分析不同炼焦残渣配比下,焦炭成分的变化,确定其较优掺入比例,并分析残渣对焦炭和尾气中多环芳烃、重金属含量的影响。结果表明,焦油渣掺入比例为4.5%,煤沥青掺入比例为6%是较为适宜的。此条件下,焦炭中重金属含量较高,进入到尾气中的部分有限,而多环芳烃含量极少,大部分都进入到尾气中,故炼焦尾气需要经冷凝、过滤和吸附净化后再排放。Coking of the coal mixed with tar dreg or tar pitch was studied for determination of the optimum ratio. The quality of coke was analyzed from the coke composition, mechanical strength, thermal properties, and the influences for the content of PAHs and heavy metals in coke and exhaust by residue were analyzed. Experimental results showed that the optimum ratio for tar dreg was 4.5% , and the optimum ratio for tar pitch was 6%. The content of heavy metals in coke was high, but the content of heavy metals in exhaust was low. In contrast, the content of PAHs in coke was low, but the content of PAHs in exhaust was high. The experimental results showed that the content of heavy metals in coke was not so different from that in crude material with the best ratio, but eoking tail gas was discharged before clearing because of PAHs.
关 键 词:捣固炼焦 最佳掺入比例 焦油渣 煤沥青 多环芳烃 重金属
分 类 号:TQ520.62[化学工程—煤化学工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3