检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宗谨[1,2,3] 周志刚[2,4] 王文广[2,4] 张晟[5] 林平[5] 石玉仁[1] 厚美瑛[2,4]
机构地区:[1]西北师范大学物理与电子工程学院,兰州730070 [2]中国科学院物理研究所,北京100190 [3]甘肃民族师范学院物理与水电工程系,合作747000 [4]中国科学院大学物理学院,北京100049 [5]中国科学院近代物理研究所,兰州730070
出 处:《物理学报》2017年第10期166-173,共8页Acta Physica Sinica
基 金:国家自然科学基金(批准号:11274354,11474326,11565021);中国科学院空间科学战略性先导科技专项(批准号:XDA04020200);地震行业科研经费(批准号:201208011)资助的课题~~
摘 要:利用压敏双折射光学特性材料,实验测量了在自然堆积和密堆积两种制样方式下颗粒仓轴向荷载在仓壁上随深度的分布.发现在填充颗粒总质量相同、容器不变的情况下,颗粒仓轴向荷载在仓壁上的分布不随颗粒深度单调变化,而是随深度呈单峰结构,数值模拟与实验观察定性符合,并且发现峰值依赖于荷载大小和样品的制备方式.另外,我们也测量了在不同填充高度下的颗粒底部平均应力随轴向荷载的变化,将其与边壁应力对比,得到颗粒体系不同深度处的转向比.In this work Janssen ratio is measured in a dense granular pack. The pressure on the side walls as a function of the depth of the pack with top load under gravity is measured by photoelastic method. The samples are prepared by “point source” method with and without tapping. A non-monotonic distribution of the side pressure along the depth is found. Numerical simulation is performed and shows qualitative consistency with the experimental finding. The apparent weight of the sample is measured for different filling heights and for different top loads. Comparing with the normal stresses on the silo wall for different heights, we obtain the Janssen ratio J =σxx/σzz as a function of height. We find that although uJ = 0.11 is a constant as is expected, the Janssen Ratio is height dependent. It becomes height independent only when the top load is large enough.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222