检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:白清华[1,2] 郭峰[2] 姜培刚[2] 黄柏林[3]
机构地区:[1]青岛理工大学计算机工程学院,山东青岛266520 [2]青岛理工大学机械工程学院,山东青岛266520 [3]香港城市大学机械与生物医学工程系,香港九龙999077
出 处:《摩擦学学报》2017年第3期283-289,共7页Tribology
基 金:国家自然科学基金项目(51275252);国家教育部博士点基金(20133721110002)项目资助~~
摘 要:根据面接触润滑油膜红绿双色光干涉强度调制信号,构造了基于光流和动态时间弯曲技术的追踪算法,对一维调制光强曲线上与膜厚具有对应关系的特定目标区域进行实时追踪,从而实现了在线实时膜厚测量.通过与稳态离线测量结果对比,验证了该在线测量系统的准确性和可靠性.利用该系统对三角波形式变速过程中流体动压润滑瞬时膜厚进行了测量,揭示了膜厚滞后于速度变化的规律.In modulated intensity signals generated by dichromatic interferograms from lubricating film in the flat-onflat contact, some characteristic target fringes can be found which correspond to constant film thickness. Based on optical flow calculation and dynamic time warping (DTW) technique, an algorithm was presented for tracking those target fringes in the 1-D modulated intensity signals, and then the on-line film thickness measurement was achieved. Under the condition of constant speed, this approach was validated by data comparison with previous off-line measurement system. In addition, with the present approach, transient film thickness under triangular wave speeds was measured, and some lubrication behaviours that the change of film thickness lagging behind the speed were revealed.
分 类 号:TH741[机械工程—光学工程] TH117.2[机械工程—仪器科学与技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.94