UV-LED固化对光纤性能的影响  

Effect on Optical Fiber Properties of UV-LED Curing

作　　者：郝昌平 曹少波 张功会 宋海瑞[2,3] 陈伟[2,3] 张良[2,3] 李亚东[1] 

机构地区：[1]苏州大学化学化工与材料科学学部,江苏苏州215123 [2]江苏亨通光电股份有限公司,江苏苏州215200 [3]江苏亨通光纤科技有限公司,江苏苏州215200

出　　处：《光学与光电技术》2017年第3期53-56,共4页Optics & Optoelectronic Technology

基　　金：国家工信部强基工程基金(0714-EMTC02-5593/12)资助项目

摘　　要：光纤制造成本的差异性受技术工艺的影响越来越小,所以通过设备改造升级,使用新型的紫外固化方式,成为降低光纤生产成本的一个重要途径。主要从紫外发光二极管(UV-LED)固化的特点、固化度、附着力方面与传统固化方式进行了分析对比,阐述了UV-LED固化方式的优势。通过使用UV-LED固化方式,固化系统的故障停机时间降低了92%,故障率降低了87%,生产能耗降低了90%,并且光纤的固化度、附着力也得到保证。因此,UV-LED固化方式是目前光纤生产降低成本、提高生产效率最有效的方式之一。The impact of fiber manufacturing cost by technology is more and more small, under this premise, transformation and upgrading of the equipment and using of the new UV curing method is an important way to reduce the costing. In this paper, the characteristics, curing degree and adhesion of UV-LED curing are compared with the traditional curing method. The advantage of UV-LED curing methods is described. By using the UV-LED curing method, the failure time of the curing system is reduced by 92%, the failure rate is reduced by 87%, the production energy consumption is reduced by 90% , while the curing degree and adhesion of the optical fiber are guaranteed. Therefore, UV-LED curing is one of the most effec- tive ways to reduce the cost and improve the production efficiency.

关 键 词：紫外发光二极管 能耗 固化度 附着力 降成本 

分 类 号：TN929.11[电子电信—通信与信息系统]