小型化X射线检测设备的导线断裂原因  

Diagnose Analysis of Wire Breakage Based on Miniaturized X-ray Detection Equipment

作　　者：马朋飞[1,2] 史腾飞[1,2] 刘荣海 杨迎春 郑欣 段新会[1] 常喜茂[1] 

机构地区：[1]华北电力大学(保定)自动化系,河北保定071003 [2]华北电力大学云南电网公司研究生工作站,昆明650217 [3]云南电网有限责任公司电力科学研究院,昆明650217

出　　处：《云南电力技术》2017年第2期34-36,共3页Yunnan Electric Power

基　　金：云南电网有限责任公司电力科学研究院重点项目(K-NY15069)

摘　　要：为分析导线断裂的原因,对同一型号的导线进行不同程度的压接操作,利用小型化的X射线检测设备对压接好的导线进行X射线检测,最后对其进行拉力检测,分析X射线透照的图片和实验数据,研究结果表明,不同程度的压接对导线的强度和断裂部位有明显的影响,并初步分析得到了原断裂导线的断裂原因。In order to analyze the reason of the fracture of a conductor, the same type of wire to carry out different degrees of compression operation, conductor was irradiated by miniaturized X ray detection equipment, finally, it carries on the tensile test, through the analysis of X images and the experimental data, results show that the different degrees of pressure on the strength of the wire and the fracture site has a significant impact, and a preliminary analysis of the reasons for the fracture of the original fault line.

关 键 词：X射线 脉冲 小型化 导线 检测 

分 类 号：TM75[电气工程—电力系统及自动化]