低黏度燃料介质中部分膜点接触弹流润滑分析  

Partial EHL Analysis of Point Contact in Low Viscosity Fuel

作　　者：古乐[1] 崔海旭[1] 马芳 张静静 张传伟[1] 崔淑慧[1] 

机构地区：[1]哈尔滨工业大学机电工程学院,哈尔滨150001 [2]中国航发哈尔滨轴承有限公司,哈尔滨150001

出　　处：《表面技术》2017年第6期49-54,共6页Surface Technology

摘　　要：目的某型发动机转子系统直接采用JP-10燃料对传动部件进行润滑,但燃料润滑的可靠性是限制其应用的瓶颈技术之一,因此拟研究传动部件在JP-10介质中的润滑状态。方法建立点接触部分膜弹流模型,模型以弹流润滑理论与弹性固体接触理论为基础,应用有限差分法进行完全数值求解。通过比较在JP-10、航空润滑油4050和4109介质中,油膜厚度、油膜压力及粗糙接触压力的分布,分析了JP-10的润滑性能。结果 JP-10形成的油膜厚度与压力均小于另外两种润滑油,JP-10介质中的粗糙接触压力远大于另外两种润滑油中的粗糙接触压力。结论 JP-10的润滑性能比常用的航空润滑油弱,其润滑可靠性较低,需要采取先进表面加工技术对传动部件间的接触表面进行防护,同时在合理范围内提高流体卷吸速度,提高表面加工质量,有利于流体润滑膜的形成。JP-10 fuel has directly used to lubricate transmission parts in certain type of aero-engine. However, reliability of fuel lubrication is one of the obstacles restricting its application. A partial EHL model of point contact was established to study lubricating conditions of the transmission parts in low viscosity fuel JP-10. Finite difference method was used to obtain numeri- cal solution of this model, which was based on elastohydrodynamic lubrication theory and elastic contact theory. The lubricating property of JP-10 was studied by comparing distributions of film thickness, film pressure and contact pressure among JP-10, aero lubricant 4050 and 4109. The film thickness and pressure of JP-10 were lower than that of the other lubricants, while asper- ity contact pressure in JP-10 was higher. Either lubricating property or lubricating reliability of JP-10 was lower than that of common aero oils. Advanced surface processing techniques, higher rotating speed within reasonable limits and higher surface precision are conducive to formation of fluid lubricating film.

关 键 词：燃料润滑 点接触部分膜弹流 有限差分法 油膜厚度 

分 类 号：TH117[机械工程—机械设计及理论]