摆线凸轮外激波摆杆活齿传动齿形设计  

Design of Tooth Profile of Cycloid Cam Outer Generator Swinging Teeth Drive

作　　者：宜亚丽[1] 豆林瑞 金贺荣[1] 张文超[2] 

机构地区：[1]燕山大学机械工程学院,河北秦皇岛066004 [2]兰州理工大学机电工程学院,甘肃兰州730050

出　　处：《机械传动》2017年第6期62-66,共5页Journal of Mechanical Transmission

基　　金：国家自然科学基金(51605416);河北省高等学校科学技术研究青年基金(QN2016095);燕山大学青年教育自主研究计划(15LGA004)

摘　　要：为实现外激波摆杆活齿减速器高传动比、重载的稳定传动,采用三阶导数连续、无刚性柔性冲击的摆线作为外激波凸轮的齿形曲线。建立复直角坐标系,采用复数矢量法设计基激波凸轮齿形,基于转速变换原理和包络理论,推导了中心轮理论及实际齿形方程。分析齿形曲率半径,制定中心轮避免齿形等距干涉的设计条件。分析了传动压力角的变化规律。In order to realize the outer generator swinging rod teeth drive steadily transmit with high trans- mission ratio and heavy load, the cycloid curve with a continuous derivative curve till third order and the character of no rigid or no flexible impact is adopted as the tooth profile of outer generator cam. The plural - rectan- gular coordinate system is established, the outer generator cam teeth profile is designed with the method of plural vector, then the theory and the actual teeth profile equations of center gear are derived based on speed conversion principle and envelop theory. Through analyzing the curvature radius of center gear, the design conditions of avoiding interference of teeth profile is determined. The change law of transmission pressure angle is analyzed.

关 键 词：摆线凸轮 外激波摆杆活齿 曲率半径 压力角 

分 类 号：TH132.41[机械工程—机械制造及自动化]