基于软件滤波的BLDCM转子位置检测  

Rotor Position Detection of BLDCM Based on Software Filtering

作　　者：刘桓[1] 张辉[1,2] 

机构地区：[1]西安理工大学,自动化与信息工程学院,陕西西安710048 [2]清华大学,电力系统及发电设备安全控制和仿真国家重点实验室,北京100084

出　　处：《电力电子技术》2017年第6期101-103,共3页Power Electronics

基　　金：国家自然科学基金(51277150,51307140);陕西省教育厅产业化培育(14JF020);电力系统国家重点实验室开放基金(SKLD16KZ01)~~

摘　　要：位置传感器是永磁无刷直流电机(BLDCM)的关键部件,其作用是检测转子位置提供换相信号。转子位置检测电路确定的换相时刻直接影响电机运行。分析常见转子位置检测电路,针对滤波电容延时和开关管开、关干扰等,提出去掉滤波电容、采用软件滤波实现转子位置检测。实验结果表明该方法可满足电机运行要求,具有可行性。Position sensors are the key part of the permanent magnet brushless direct current motor（BLDCM）, which are to detect the rotor position and provide the commutation signals.The rotor position detection circuit determines the commutation time,which directly affects the operation of the motor.Common rotor position detection circuits are analyzed.In order to deal with the delay effect of filter capacitor and the interferences of the switching on and off, software filtering is proposed to detect the rotor position while removing the filter capacitor.The experimental results show that the method can meet the requirements of the motor running, which is feasible.

关 键 词：永磁无刷直流电机 转子位置检测 软件滤波 

分 类 号：TM315[电气工程—电机]