一种太阳能市电互补型LED光立方系统  

A LED light cube system with solar power and electric supply

作　　者：朱尧富[1] 张丽萍[1] 

机构地区：[1]台州职业技术学院电气信息学院,浙江台州318000

出　　处：《电子设计工程》2017年第11期94-96,101,共4页Electronic Design Engineering

基　　金：台州职业技术学院大学生科技创新项目(2014DKC02);浙江省大学生科技创新项目(2015R462002)

摘　　要：针对目前LED立体成像系统单一供电方式,本文设计LED光立方电源采用太阳能和市电两种供电方式,市电供电方式选择高效率5 V 2 A电源适配器,白天太阳能供电方式通过太阳能PV板将太阳能转换为3~6 V电压,并通过储电单元和升压电路为系统提供稳定电源,直流升压稳压电路芯片选用B6284。通过主控芯片STC12C5A60S2控制512个LED组成的8*8*8立体显示装置,设计逐层扫描的工作方式,显示3D图文,实际测得输出电压为5.05 V,LED亮度统一,两种供电方式下均能达到显示效果。In connection with the single power supply of the LED three-dimensional imaging system, both solar and electric power supply are provided in this paper, the electric power supply choose a high efficiency 5 V 2A power adapter, the solar power supply choose solar PV panels to converts light energy into DC 3-6 V, through the storage unit and booster circuit to provide a stable power supply, and select B6284 as DC booster regulator chip. This system design a 8＊8＊8 display cube consists of 512 LED based on STC12C5A60S2 single-chip as control core, and a layer-by-layer operation mode is adopted to display 3D graphics, through actual circuit experiment, the output voltage is 5.05 V,all LED have uniform brightness, the two kinds of power supply can achieve the expected display effect.

关 键 词：光立方 供电方式 太阳能 逐层扫描 

分 类 号：TN702[电子电信—电路与系统]