检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘小林[1,2]
机构地区:[1]中煤科工集团重庆研究院科聚孚工程塑料有限责任公司,重庆400037 [2]四川大学高分子科学与工程学院,四川成都610065
出 处:《塑料工业》2017年第6期80-84,共5页China Plastics Industry
摘 要:采用熔融共混法制备了聚乙烯共混物,利用力学性能测试和TDS-GC/MS分析手段考察了吸附剂、萃取剂以及真空度对聚乙烯(PE)共混物力学性能、气味和挥发性有机化合物(VOC)的影响。结果表明,随着吸附剂、萃取剂和真空度的增加,PE共混物的气味和总挥发性有机物(TVOC)随之降低,而力学性能变化不大;另外,吸附剂含量的增加,PE共混物的吸湿性会随之增强;在PE共混物中,当吸附剂和萃取剂含量分别为0.5%、1.5%时,综合性能最佳。The polyethylene (PE) blend was prepared by melt blending. The effects of adsorbent, extracting agent and degree of vacuum on the mechanical properties, odor and volatile organic compounds (VOC) of the blend were studied by mechanical property test, TDS-GC/MS analysis. The results show that, with the increasing of adsorbent and extracting agent and degree of vacuum, the odor and total VOC of PE blend are lowered, while the mechanical properties change little. In addition, with increasing the adsorbent content, the moisture absorption ability of PE blend improves. When the contents of adsorbent and extracting agent are 0. 5wt% and 1.5wt% , respectively, the comprehensive performance of the PE blend is the best.
分 类 号:TQ325.12[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38