基于CFD数值模拟的换热器外导流筒优化设计  

Optimum Design of External Flow Distributor Structure in Heat Exchanger Based on CFD Numerical Simulation

作　　者：王庆锋[1] 郝帅[1] 李凯[1] 李中[1] 

机构地区：[1]北京化工大学机电工程学院,北京100029

出　　处：《过程工程学报》2017年第3期461-468,共8页The Chinese Journal of Process Engineering

基　　金：国家重点基础研究发展计划(973)资助项目(编号:2012CB026000);中国石油科技创新基金资助项目(编号:2015D-5006-06 06);北京市重点学科建设项目资助

摘　　要：基于计算流体力学方法,模拟了换热器外导流筒结构参数入口倾角θ、内筒高端间隙L和导流筒高度H对壳程纵截面和入口截面流场流动均匀性的影响.结果表明,改变影响流通面积的结构参数θ,L,H,能改善介质进入壳程后流场分布的均匀性,优化参数为θ=9°~15°,L=105~110 mm,H=204~212 mm.The changes of three key structure parameters entrance angle （θ）, clearance of inner high end （L）, distributor height （H） on the average velocity and the flow uniformity of the shellside vertical section and the entrance section after the steam enters the shellside were studied by means of computational fluid dynamics method. The results showed that flow uniformity after medium enters the shellside was actually improved by changing the structure parameters θ, L, H, which influence flow area. Considering the flow uniformity of the shellside vertical section and the entrance section, the optimized parameters which make the shellside flow uniformity are θ=-9°-21 °, L=100-120 mm, H=204-216 mm.

关 键 词：外导流筒 计算流体力学 数值模拟 流动均匀性 优化设计 

分 类 号：TQ053.2[化学工程]