阴离子表面活性剂自动分析仪的研究  

Study on Auto-analyzer of Anionic Surfactant

作　　者：奚文忠 张乐乐[2] 郭少为[2] 许行翔[2] 路淅红 方佩佩[2] 

机构地区：[1]上海市黄浦区环境监测站 [2]上海理工大学环境与建筑学院

出　　处：《化工自动化及仪表》2017年第6期542-544,616,共4页Control and Instruments in Chemical Industry

摘　　要：提出阴离子表面活性剂自动分析仪(国标)的设计方法,给出其工作原理、硬件选型和软件组态。与传统方法相比,仪器测定阴离子表面活性剂的萃取率略有提升,多次自动测定的最低检出限为0.03mg/L。A national standard method of designing auto-analyzer for the anionic surfactant was proposed and its working principle, hardware selection and software configuration were presented. Compared to the tradition- al measurement, the extraction rate measured by the instrument is slightly increased and the lowest limit of de- tection for many times is 0.03mg/L.

关 键 词：阴离子表面活性剂分析仪 氯仿 测定 硬件 软件组态 

分 类 号：TH832[机械工程—仪器科学与技术]