盐酸体系N503萃取分离铟铁研究  

Solvent Extraction of Indium and Iron from Hydrochloric Acid with N,N'-di (1-methyl-heptyl) Ace Amide (N503)

作　　者：郭小东[1] 李兴彬[1] 魏昶[1] 李存兄[1] 邓志敢[1] 李旻廷[1] 

机构地区：[1]昆明理工大学冶金与能源工程学院,昆明650093

出　　处：《有色金属工程》2017年第3期46-50,共5页Nonferrous Metals Engineering

基　　金：国家自然科学基金资助(51304093);高等学校博士学科点专项科研基金资助(20115314110001)

摘　　要：研究了酰胺类萃取剂N503(N,N'-二(1-甲基庚基)乙酰胺)从盐酸溶液中萃取铟和铁的行为,考察了盐酸浓度、萃取剂浓度和氯离子浓度对铟、铁萃取率的影响。结果表明:盐酸浓度、萃取剂浓度对In(Ⅲ)和Fe(Ⅲ)的萃取率影响较显著,在研究的盐酸浓度范围内,溶液中铟、铁的萃取顺序为Fe(Ⅲ)>In(Ⅲ)>Fe(Ⅱ);当盐酸浓度为3 mol/L,N503浓度为20%时,Fe(Ⅲ)的萃取率接近100%,In(Ⅲ)的萃取率约为70%,Fe(Ⅱ)的萃取率小于1%,Fe(Ⅲ)与In(Ⅲ)难以选择性萃取分离,而Fe(Ⅱ)与In(Ⅲ)可以实现选择性萃取分离;Fe(Ⅲ)、In(Ⅲ)萃合物反萃性能接近,均能被稀盐酸反萃,难以实现选择性反萃分离。从盐酸溶液中萃取分离铟、铁的较佳工艺为:先采用铁粉将Fe(Ⅲ)还原为Fe(Ⅱ),再采用N503选择性萃取,然后用0.1 mol/L盐酸溶液反萃In(Ⅲ),铟、铁分离系数可以达到1 400,该研究可为铟、铁的分离提供数据基础和理论指导。The extraction behaviors of indium and iron from hydrochloric acid solution by amide extracting agent named as N,N＇- di（1-methyl-heptyl） ace amide （N503） were studied. The effects of hydrochloric acid concentration, extracting agent concentration and chloride ions of aqueous phase on the indium and iron extraction were examined. The results show that the hydrochloric acid concentration and extracting agent concentration are more significant to the extraction. In the range of hydrochloric acid investigated, the sequence of extracted ions in the solution is Fe（Ⅲ） 〉 In（Ⅲ） 〉 Fe（Ⅱ）. The efficiency of Fe（Ⅲ） and In（Ⅲ） is almost 100 % and 70 % , respectively, but Fe（Ⅱ） is almost not be extracted when the chloride acid concentration is 3 mol/L and the extracting agent concentration is 20%. So it is difficult to separate Fe（Ⅲ） and In（Ⅲ） by extraction, but Fe（Ⅱ） and In（Ⅲ） can be achieved by this process. Beside, due to the similar character of Fe（Ⅲ） and In（Ⅲ）-containing complex （easy stripping）, separation of Fe（Ⅲ） and In（Ⅲ） can not be achieved by stripping. Hence, the craft of separation of indium and iron from hydrochloric acid solution contains reducing Fe（Ⅲ） to Fe（Ⅱ） with iron powder, extracting with N503 and stripping by 0. 1 mol/L hydrochloric acid. The separation factor is 1 400, which can provide a basic data and theory instruction for the separation of indium and iron.

关 键 词：N503 铟铁分离 溶剂萃取 

分 类 号：TF803.23[冶金工程—有色金属冶金]