Sysmex CS5100检测高浓度D-二聚体的稀释验证分析  

Dilution validation of high level D-dimer samples in Sysmex CS5100 instrument

作　　者：颜楠 屈玲 郑善銮 郝晓柯 

机构地区：[1]第四军医大学第一附属医院西京医院检验科,西安710032

出　　处：《国际检验医学杂志》2017年第12期1630-1633,共4页International Journal of Laboratory Medicine

摘　　要：目的探讨高浓度D-二聚体在抗原过剩情况下是否需要进行稀释处理及最适稀释倍数。方法采用Sysmex CS5100分析仪对D-二聚体质控品与校准品进行检测,计算批内与日间精密度。检测校准品进行线性范围及临床可报告范围验证。对D-二聚体水平小于5mg/L、纤维蛋白降解产物(FDP)<20μg/mL的标本进行梯度稀释,检测并计算回收率。对D-二聚体水平大于5mg/L、FDP>20μg/mL的标本进行梯度稀释,检测并计算回收率。结果批内及日间精密度分析结果显示,批内及日间变异系数均小于3%。线性范围验证结果显示,0.207~5.170mg/L范围内线性分布良好。临床可报告范围为0.207~165.440mg/L。D-二聚体水平小于5mg/L、FDP<20μg/mL时,D-二聚体检测无抗原过剩现象,无需进行梯度稀释检测。D-二聚体水平大于5mg/L、FDP>20μg/mL时,D-二聚体检测存在抗原过剩现象,需进行稀释处理。结论当标本D-二聚体水平大于5mg/L、FDP>20μg/mL时,D-二聚体检测存在抗原过剩现象,需进行稀释处理,从而保证高浓度D-二聚体标本检测结果的准确性。Objective To investigate the necessity of dilution in samples with high concentrations of D-Dimer and optimum dilu-tion multiple. Methods Quality control products and calibration were detected by using Sysmex CS5100 for precision evaluation,in-cluding within-batch and between-run precision. Calibration were detected for validation of linear range and clinical reportable. Sam-ples with D-Dimer〈C5 mg/L and fibrinogen degradation products（FDP）〈C20 jug/mL were serially diluted and detected to calculate recovery rate. Samples with D-Dimer〉5 mg/L and FDP〉20 jug/mL were also serially diluted and detected to calculated recovery rate. Results Within-batch and between-run coefficients of variation were both less than 3%. Within the scope of 0. 207 - 5. 170 mg/L,the linear distribution was fine. The clinical reportable range was 0. 207-165. 440 mg/L. For samples with D-Dimer〈C5 mg/L and FDP〈C20 jng/mL,no antigen excess phenomenon was found,and gradient dilution was not necessary. For samples with D-Dimer 〉5 mg/L and FDP〉20 jug/mL,there was obvious antigen excess phenomenon,and gradient dilution was required. Conclusion For samples with D-Dimer〉5 mg/L and FDP〉 2 0 jug/mL,dilution should be performed to ensure the accuracy of detected results.

关 键 词：SYSMEX CS5100 D-二聚体 批内精密度 日间精密度 线性范围 临床可报告范围 高浓度 稀释 

分 类 号：R446.1[医药卫生—诊断学]