低中放可燃废物玻璃固化过程关键工艺参数优化研究  

Study on Key Process Parameter Optimization in Glass Solidification for Low and Middle Level Radioactive Combustible Wastes

作　　者：曹骐[1] 陈云明[1] 张劲松[1] 吕永红 冯伟伟[1] 鲁芸芸[1] Cao Qi Chen Yunming Zhang Jingsong Lyu Yonghong Feng Weiwei Lu Yunyun(Reactor Operation and Application Subdnstitute, Nuclear Power Institute of China, Chengdu, 610213, China China Nuclear Power Technology Research Institute CO. LTD., Shenzhen, Guangdong, 518031, China)

机构地区：[1]中国核动力研究设计院反应堆运行与应用研究所,成都610213 [2]中广核研究院有限公司,广东深圳518031

出　　处：《核动力工程》2017年第3期172-175,共4页Nuclear Power Engineering

摘　　要：针对低中放可燃废物棉制品、吸水纸、橡胶与塑料的玻璃固化配方,分别对其高温粘度及低温粘度进行研究,获得了优选配方玻璃固化过程中熔化温度、成型操作温度、软化温度、应变点温度及退火点温度等重要工艺温度的结果。The high-temperature and low-temperature viscosity of the glass curing formula for the low and middle level radioactive combustible waste, such as cotton and blotting paper, rubber and plastic, was studied. The important results, such as melting temperature, molding temperature, softening temperature, strain point temperature and annealing temperature, were obtained

关 键 词：低中放可燃废物 玻璃固化 工艺参数 高温粘度 低温粘度 

分 类 号：TL941.3[核科学技术—辐射防护及环境保护]