基于EDFA和级联RFA的混合光纤放大器的设计  

Design of Hybrid Optical Fiber Amplifier Based on EDFA and Cascading RFA

作　　者：巩稼民[1] 杨萌[1] 孟令贺[1] 郭翠[1] 

机构地区：[1]西安邮电大学电子工程学院,西安710121

出　　处：《半导体光电》2017年第3期321-324,348,共5页Semiconductor Optoelectronics

基　　金：西安邮电大学研究生创新基金项目(CXL2015-21)

摘　　要：基于EDFA的理论模型和受激拉曼散射效应的分析理论,利用EDFA和RFA的增益谱互补特性,对拉曼光纤放大器(RFA)采用两根光纤级联方式,研究并设计了EDFA与级联光纤的RFA相结合的混合放大器结构。仿真结果表明:在不使用增益均衡器的条件下,所设计的混合光纤放大器在输出端得到了近似相等的输出光功率,得到了增益平坦度为0.62dB、波长带宽为70nm(1 550~1 620nm)的结果,在密集波分复用光通信系统中有重要的应用价值。Based on the theoretical model of EDFA and the analysis theory of the stimulated Raman scattering effecting,making use of the complementary characteristics of the gain spectrum of EDFA and RFA,the hybrid amplifier structure combining EDFA and RFA was studied and designed with two fibers cascading RFA.The simulation results show that the hybrid fiber amplifier can obtain the approximate equal output signal power without gain equalizer.The gain flatness and the wavelength bandwidth are 0.62 dB and 70nm（1 550~1 620nm）,respectively.It has important application value for the dense wavelength division multiplexing optical communication system.

关 键 词：级联光纤 混合放大器 掺铒光纤放大器 拉曼光纤放大器 

分 类 号：TN929.11[电子电信—通信与信息系统]