检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]上海工程技术大学城市轨道交通学院,上海201620
出 处:《声学学报》2017年第4期465-475,共11页Acta Acustica
基 金:国家自然科学基金项目(51605274);上海高校青年教师培养计划项目(ZZGCD15115);上海市教育委员会科研创新项目(14YZ137);江西省博士后科研项目择优项目(2014ky20)资助
摘 要:为消除在非自由声场中重建声场时干扰声源对重建效果的影响,提出一种采用单个测量面上的声压和质点振速作为输入、等效源法作为分离和重建算法的非自由声场中目标声场还原与重建方法。该方法首先利用单面声压-质点振速测量和基于等效源法的声场分离技术将测量的混合声场分离为来自目标声源的向外传播的声场和来自干扰声源的向内传播的声场,然后利用向内传播的声场和目标声源的边界条件计算出干扰声在目标声源表面产生的散射声场,并将其从向外传播的声场中去除,还原出目标声源在自由声场条件下的辐射声场,最后利用还原的声场实现目标声场重建。通过数值仿真和实验检验了该方法的有效性和必要性。仿真和实验的结果表明,该方法可以在非自由声场的测量条件下,有效地去除干扰声的影响,实现目标声场的准确重建。In a non-free field, the existence of disturbing sources would destroy the free-field condition required by near- field acoustic holography, and confuse the identification of target source due to the scattering effect caused by disturbing sound falling on the target source. To totally remove the influence of disturbing source, a method for recovering and reconstructing the target sound field in a non-free field was proposed based on the equivalent source method and the pressure-velocity measurement. In the proposed method, the sound field separation technique was firstly used to separate the mixed sound field into the outgoing field coming from the target source and the incoming field coming from the disturbing source. Then the scattered component contained in the outgoing field was calculated by using the disturbing sound and the surface impedance of the target source. Finally, the sound field radiated by the target source in a free field was obtained by subtracting the scattered component from the outgoing field and was further used to reconstruct the sound field of the target source. The proposed method was numerically and experimentally testified and the results of both the simulation and the experiment demonstrated the validity of the proposed method.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3