连续流变挤压技术在制备高性能铝材中的应用  

Application of Continuous Rheo-extrusion in Preparation of High Performance Aluminum Alloy

作　　者：商迎秋[1] 王祥[1] 王宇翔[1] 王宁[1] 管仁国[1] 

机构地区：[1]东北大学材料科学与工程学院,沈阳110819

出　　处：《精密成形工程》2017年第4期36-42,共7页Journal of Netshape Forming Engineering

摘　　要：目的探索铝材短流程制备工艺,制备出高性能铝合金材料。方法采用连续流变挤压成形技术制备Al-Ti-B晶粒细化剂与Al-Sc-Zr耐热铝合金导线;利用提出的连续流变挤压与累积连续挤压法,制备超细晶金属材料。结果采用连续流变挤压成形技术制备Al-Ti-B晶粒细化剂,其细化效果优于国外同类产品,且制备流程短、成本低;制备出的高性能的Al-Sc-Zr耐热铝合金导线,其抗拉强度、伸长率和导电率分别达到223 MPa、7.1%和60.5%IACS,并且可在230℃的温度下长期运行,相比于日本耐热铝合金导线,其抗拉强度、伸长率与导电率分别提高了39.4%,255%,0.83%;采用连续挤压技术制备的Al-Sc-Zr合金杆,经过累积连续挤压后,合金晶粒尺寸从100μm细化至800 nm,得到了超细晶Al-Sc-Zr合金。结论连续流变挤压技术制备铝材工艺流程短、产品性能优良,能连续高效制备铝合金超细晶材。The paper aims to explore the manufacturing process of aluminum alloy to prepare high performance aluminum alloy. AI-Ti-B grain refiner and Al-Sc-Zr heat- resistant aluminum alloy conductor were prepared by continuous rheo-extrusion. The continuous rheo-extrusion and accumulative continuous extrusion forming （ACEF） were proposed to prepare ultra-fine grain metal material. The Al-Ti-B refiner processed by continuous rheo-extrusion had better grain refinement effect and lower cost and shorter process than refiner imported. A novel heat-resistant Al-Sc-Zr alloy conductor with the tensile strength of 223 MPa, elongation of 7.1%, and conductivity of 60.5% was also prepared, and it can be long-term used at 230 ℃. The tensile strength, elongation and conductivity of the Al-Sc-Zr alloy conductor were 39.4%, 255% and 0.g3% higher than that of Japanese heat-resistant Al alloy conductor. The grain size of Al-Sc-Zr alloy wire which was prepared by continuous rheo-extrusion was refined from 100 μm to 800 nm after one pass ACEF. Ultra-fine grain Al-Sc-Zr alloy was obtained by ACEF. The continuous rheo-extrusion has the advantages of short process and high performance of product, and can prepare ultra-fine grain of aluminum alloy continuously and effectively.

关 键 词：连续流变挤压 Al-Ti-B细化剂 铝合金导电杆 超细晶 

分 类 号：TB31[一般工业技术—材料科学与工程]