Autoconer X5 D型络筒机槽筒参数及张力设定  

Grooved Drum Parameters and Tension Setting of Autoconer X5 D Winder

作　　者：瞿建新 陆锦明 

机构地区：[1]江苏工程职业技术学院,江苏南通226007

出　　处：《棉纺织技术》2017年第7期56-59,共4页Cotton Textile Technology

摘　　要：介绍Autoconer X5D型络筒机的槽筒参数设置和张力控制要点。详细论述了Autoconer X5D型络筒机槽筒的启动、加速、防叠参数的设置方法,分析了Autoconer X5D型络筒机络筒张力设置中自动调速功能和拉力传感器的应用效果。指出:络筒机上槽筒参数设置对络筒质量有显著影响;自动调速功能和拉力传感器对于稳定络筒张力具有重要作用。认为:在络筒机的使用过程中必须重视槽筒参数的合理设置;正确使用自动调速功能,能减小络筒张力的波动;拉力传感器的使用,使得络筒张力一致,筒子密度均匀性好。Grooved drum parameters setting and tension control key points of Autoconer X5 D winder were introduced. Setting method of start up, acceleration and anti-stack parameter of Autoconer X5 D winder grooved drum were elaborated. Application effect of automatic speed regulation and tension sensor in winding tension set ting of Autoconer X5D winder were analyzed. It is pointed out that grooved drum parameter setting has signifi cant effect on the winding quality. Automatic speed regulation and tension sensor play key role in stabilizing wind ing tension. It is considered that rational set up grooved drum parameter should be pay attention in the use of winder. Trough proper usage of automatic speed regulation,the winding tension fluctuation can be decreased. The usage of tension sensor can make winding tension keep consistent and has better uniform winding density.

关 键 词：AUTOCONER X5 D型络筒机 槽筒启动 加速度 防叠 自动调速 络筒张力 

分 类 号：TS103.236[轻工技术与工程—纺织工程]