Q345GJ高建钢屈服强度不合格原因分析及改进措施  

Causes Analysis and Corrective Measures for Unqualified Yield Strength of High-Rise Building Steel Q345GJ

作　　者：冯路路[1] 卢正红[1] 杨红梅[1] 陈畅子[1] 

机构地区：[1]荆楚理工学院

出　　处：《宽厚板》2017年第3期20-22,共3页Wide and Heavy Plate

基　　金：荆楚理工学院校级科研项目(YB201702;CXY201603;CXY201501)

摘　　要：对Q345GJ高建钢的化学成分、轧制工艺、水冷工艺、位移-应变曲线以及金相组织进行了检验分析,结果表明:钢板轧制后不经过一段时间的驰豫而是直接水冷,产生下贝氏体组织,导致屈服强度不合格。通过优化生产工艺,降低了钢板的屈服强度,提高了性能合格率。Testing and analysis are performed on chemical composition, rolling process, cooling process, dis-placement -strain curve and metallorgraphic structure of high - rise building steel Q345GJ. The results show that low bainite formes in steel plate which receives direct cooling without a period of relaxation after rolling, resulting in non - conformity of yield strength. The yield strength of steel plate is reduced and the corresponding qualification rate is im-proved by means of production process optimization.

关 键 词：Q345GJ 高建钢 屈服强度 不合格 原因分析 改进措施 

分 类 号：TG142.1[一般工业技术—材料科学与工程] TG335[金属学及工艺—金属材料]