UG参数化建模在发电机部件设计上的应用  

Applications of UG Parametric Modeling Method in Generator Parts Design

作　　者：范芳蕾[1,2] 余宏涛[1] 胡密 殷慧华[1] 

机构地区：[1]东华理工大学江西省新能源工艺及装备工程技术研究中心,南昌330013 [2]南昌ABB发电机有限公司,南昌330096

出　　处：《机械工程师》2017年第10期39-41,44,共4页Mechanical Engineer

基　　金：江西省教育厅青年项目(GJJ160581);省级研究中心开放基金项目(JXNE2014-04)

摘　　要：传统模式设计过程中,发电机的转子扭振图需要设计者根据电算单中相关参数计算出转子的转动惯量和重量等参数,最后输入到二维CAD软件设计。整个设计过程人为操作易出错,而且效率低。基于UG软件二次开发进行转轴参数化建模,更新原有设计模式,针对转子图进行自动化设计模块的开发。提高产品标准化程度,缩短设计时间,缩减成本,提升产品市场竞争力。In the traditional model design process, the rotor torsional vibration diagram of the generator needs the designer to calculate the parameters such as the moment of inertia and weight of the rotor according to the relevant parameters in the calculation form, and finally input to the 2D CAD software design. The whole design process is easy to operate, and the efficiency is low. Based on the secondary development of UG software, the parametric modeling of the shaft is carried out, the original design pattern is updated, and the automatic design module for the rotor diagram is developed. Product standardization is improved.Design time and cost are reduced. The product market competitiveness is improved.

关 键 词：转子扭振图 参数化建模 二次开发 设计效率 

分 类 号：TP391.72[自动化与计算机技术—计算机应用技术]