响应面法对磷酸化淫羊藿多糖制备工艺的研究  

A study of preparation process for phosphorylated epimedium polysaccharide by response surface method

作　　者：倪海钰 关珊[1] 衣蕾[1] 吴秋月[1] 廖智[1] 武毅[1] 

机构地区：[1]南京农业大学动物医学院,江苏南京210095

出　　处：《畜牧与兽医》2017年第7期114-119,共6页Animal Husbandry & Veterinary Medicine

基　　金：国家自然科学基金项目(31302135);江苏省自然科学基金-青年基金项目(BK20130678);高等学校博士学科点专项科研基金-新教师项目(20130097120026);南京农业大学SRT计划项目(1617A07)

摘　　要：采用混合磷酸盐法制备磷酸化淫羊藿多糖,再以磷酸化淫羊藿多糖磷酸根含量为考察指标,通过响应面法对工艺的提取参数进行优化,研究了修饰条件中反应温度(A)、反应时间(B)和反应p H值(C)3个因素对磷酸化多糖磷酸根含量的影响,建立了回归模型,验证了其有效性,并分析了主效应和因素交互作用。结果表明:反应温度、反应时间和反应p H值对磷酸化淫羊藿多糖磷酸根含量的影响显著,并且两两因素间存在一定的交互作用;影响磷酸化淫羊藿多糖的工艺因素按主次顺序排列为:反应温度>反应时间>反应p H值;磷酸化淫羊藿多糖的最佳工艺为:三聚磷酸钠与三偏磷酸钠比例为5∶2,反应温度97℃,反应时间2.8 h,反应p H 8.7,在此条件下,磷酸化淫羊藿多糖磷酸根含量为(6.012±0.021)%。Phosphorylated epimedium polysaccharide was prepared by mixed phosphates method. Then response surface method（ RSM）was used to optimize the influences of reaction temperature（ A）,reaction time（ B） and reaction p H（ C） on the content of phosphate group.Recursive model was established,the validity of the model was analyzed and the main effect and interaction of the factors were tested. As a result,A,B and C significantly influenced the content of phosphate group,and significant two-factor interactions were observed. The influencing order of these three factors on phosphate group content was A〉B〉C,and the best reaction condition was as follows： the ratio of sodium tripolyphosphate-three sodium hexametaphosphate ratio was 5 ∶ 2,the reaction temperature was 97 ℃,the reaction time was 2. 8 h,and the reaction p H was 8. 7. At this condition,the content of phosphate group was（ 6. 012±0. 021） %.

关 键 词：淫羊藿多糖 磷酸化 响应面法 制备工艺 

分 类 号：S853.75[农业科学—临床兽医学]