后处理工艺对POSS-PMMA_8改性凝胶聚合物电解质性能的影响  

Effect of post treatment on gel polymer electrolyte modified with POSS-PMMA_8

作　　者：管兴华[1] 孙坤[1] 张帆[1] 陈芳[1] 马敬玉 马晓燕[1] 

机构地区：[1]西北工业大学理学院,西安710129

出　　处：《复合材料学报》2017年第7期1437-1442,共6页Acta Materiae Compositae Sinica

基　　金：陕西省科技统筹创新工程计划(2016KTZDGY10-01);陕西省自然科学基金(2013JM2012);西北工业大学研究生创新创意种子基金重点项目(Z2016035)

摘　　要：为解决凝胶聚合物电解质(GPE)的离子电导率低、力学性能差等问题,通过静电纺丝制备星型笼型低聚倍半硅氧烷-聚甲基丙烯酸甲酯(POSS-PMMA_8)改性聚甲基丙烯酸甲酯-聚丙烯腈-聚偏氟乙烯(PMMA-PANPVDF)得到聚合物纺丝薄膜(POSS-PMMA_8/PMMA-PAN-PVDF)M1,将聚合物纺丝薄膜M1在120℃热处理得到聚合物纺丝薄膜M2,或热压并预氧化处理得到聚合物纺丝薄膜M3,将其浸泡于电解液中活化得到POSS-PMMA_8/PMMA-PAN-PVDF的GPE。对不同状态聚合物纺丝薄膜M1、M2、M3的形貌、孔隙率、吸液率、力学性能及其GPE的电导率和电化学稳定窗口进行测试。结果发现,相比于M1,M2的拉伸强度及GPE的电导率分别提高9.2%及181.1%,电化学窗口增至5.3 V;而M3的拉伸强度和GPE电导率分别较M1增加193.7%、20.2%,电化学窗口增至5.5V。To improve the ion conductivity and tensile strength of gel polymer electrolyte（GPE）,a novel starshaped polyhedral oligomericsilsesquioxane-polymethyl methacrylate（POSS-PMMA8）was successfully synthetized and introduced to the polymethyl methacrylate/polyacrylonitrile/polyvinylidene fluoride（PMMA-PAN-PVDF）matrix to obtain fibrous membrane M1（POSS-PMMA8/PMMA-PAN-PVDF）by electrospinning.Membrane M1 was annealed at 120 oC to get membrane M2,or processed by hotpressing and pre-oxidizing to get membrane M3.Then the corresponding activated GPEs were prepared by soaking M1,M2 and M3 in liquid electrolyte.The morphologies,porosity,electrolyte uptake,and mechanical properties of these membranes（M1,M2 and M3）,as well as the ion conductivity and electrochemical stability of their corresponding GPEs were fully investigated.The results show that,compared to M1,the tensile strength of M2 and ion conductivity of its GPE increase by 9.2% and 181.1%,respectively,and the electrochemical window of M2 and its GPE increases to 5.3V;besides,the tensile strength of M3 and ion conductivity of its GPE increase by 193.7% and 20.2%,respectively,and the electrochemical window of M3 and its GPE increases to 5.5V.

关 键 词：后处理 POSS-PMMA8 静电纺丝 薄膜 电导率 拉伸强度 

分 类 号：TQ152[化学工程—电化学工业]