钾盐镀锌电流下降的工艺故障分析  

Process Fault Analysis on the Phenomenon of Current Decline during Sylvite Zinc Plating

作　　者：胡瑞华[1] 霍大勇 HU Ruihua HUO Dayong(Nanyang Institute of Technology, Nanyang 473004, China Kashgar University, Kashgar 844006, China)

机构地区：[1]南阳理工学院,河南南阳473004 [2]喀什大学,新疆喀什844006

出　　处：《电镀与精饰》2017年第7期30-34,共5页Plating & Finishing

摘　　要：通过对钾盐镀锌生产中电流开不大,镀层易烧焦、灰暗等生产故障实例的分析,指出了钾盐镀锌生产中设备和工艺故障均会造成这一现象的产生。将其中的工艺故障分为六个种类,介绍了故障原因的查找方法和故障处理方法,总结了钾盐镀锌生产线预防同类故障发生的技术措施和故障判别经验。Through analyzing the production failure example, such as current is limited, coating is easy to burn and gray, occurring during the sylvite zinc plating production, it was pointed out that both equipment and process failures would cause these phenomena. The process faults were divided into six kinds, the methods of finding the fault cause and the methods of dealing with it were introduced, technical measures for preventing similar failures and fault discrimination experience for sylvite zinc plating production line were summarized.

关 键 词：钾盐镀锌 导电盐 电流密度 氯化钾 氧化锌 故障分析 

分 类 号：TQ153.15[化学工程—电化学工业]