检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安科技大学能源学院,陕西西安710054 [2]神东煤炭集团哈拉沟煤矿,陕西神木719315 [3]中国有色金属建设股份有限公司,北京100029
出 处:《矿业工程研究》2017年第2期68-73,共6页Mineral Engineering Research
基 金:高等学校博士学科点专项科研基金资助项目(20120023110023);中央高校基本科研业务费专项资金资助项目(2014QZ03)
摘 要:工作面长度的加大在提高开采效率和资源采出率的同时,必将引起上覆岩层破坏及运移规律的改变,需要对超长工作面矿压显现规律进行研究以指导现场实践.以哈拉沟煤矿12上101工作面为背景,采用现场实测方法,对普通工作面与超长工作面下的初次来压、周期来压特征进行了测定分析,结果表明:老顶初次来压期间,超长工作面对应老顶垮落步距、来压期间支架循环末阻力及动载系数均大于普通工作面;周期来压期间,较普通工作面相比,工作面长度的增加使得来压步距将逐渐变小,当顶板来压时会支架循环末阻力、动载系数等一系列参数将逐渐增大,因此对于超长工作面周期来压时,压力强度相对比其它工作面显现明显.该研究为后续类似工作面的开采提供了一定程度的指导.The increase of the working face length improves mining rate and efficiency, but causes the changes of overburden failure and migration patterns. The regularity of ground pressure under ultra long working face needs to be studied, so as to guide the practice. Take the mining condition of 12- 101 working face in Halagou Coal Mine as the background, this paper studies the characteristics of initial weighting and period weighting under conditions of ordinary working face and ultra long working face by using the field measurement method. Results show that failure step, support resistance and dynamic load coefficient of the ultra long working face are larger than those of the ordinary working face in the initial weighting of the main roof ; failure step of the ultra long working face is less than ordinary working face, the support resistance, dynamic load coefficient, and weighting duration of the ultra long working face are larger than those of the ordinary working face in the period weighting of the main roof, which means the working face periodic weighting strength relatively large. It provides guidance for subsequent similar mining conditions.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28